Before applying the Product, it is recommended to thoroughly clean the surface which should be smooth and free of all traces of residue that would otherwise be visible after application.

We suggest to use the tool SPATULA, that you can buy on our online shop.

For Tileskin® with SMELLTRAP maintenance some steps are needed (read below) using ACTIVATOR, a natural origin product, used to activate and regenerate the Tileskin® material with SMELLTRAP function.

It is available for purchase on the site (buy Activator) in packs of 50cl and the pack should preferably be kept in the freezer (it can withstand 20 freezing cycles without deteriorating) or in the fridge.

Per l'applicazione in zone critiche è consigliabile smontare tutto ciò che può essere rimosso dalla superficie da decorare, come mostrato nel video.

In seguito, dopo aver rifilato con un cutter le zone di adesivo che devono essere rimosse si potrà montare nuovamente il tutto per far sì che vengano coperte eventuali imperfezioni.

Tileskin® is a Product that can be cleaned with normal non-aggressive detergents of a neutral Ph, preferably based on natural soap.

As it is a plastic, self-adhesive product, it must be treated with all due care to prevent accidental detachment during cleaning and chemical aggression in the case of use of unsuitable detergents.

Tileskin® can be removed at any time by carefully detaching one corner and then pulling the film slowly either diagonally or at an angle to remove the adhesive. If the surface detaches and remains on the material, this means the surface is not suitable for application.

We advise you remove it as slowly as possible even though sometimes this precaution is not always sufficient.